Tender Notice for 3C 185 Sqmm XLPE insulated 11 KV armoured cable Aluminium conductor,Glass Fiber Filled Moulded Cabl in NARMADA, GUJARAT

Public procurement opportunity for Sardar Sraovar Narmada Nigam Limited3C 185 Sqmm XLPE insulated 11 KV armoured cable Aluminium conductor , Glass Fiber Filled Moulded Cable Cleats , 3.5 core 500 Sq.mm, 240 Sqmm 0.5 core XLPE armoured cable multistrand Aluminium conductor for 1.1 KV , Double compression type cable gland , Aluminium lugs 500 Sqmm , Aluminium lugs 240 Sqmm , Cable end termination Kit suitable for LT , FRP Ladder type Cable Tray , HDPE Pipe of 90 mm internal diameter , HDPE Pipe of 110 mm internal diameter , Trench in Hard Murrum , Trench in Hard Murrum with hammer driller or JCB use , Casting of transformer foundation , 500 kVA Transformer , Straight joint for HT cable , 11 KV DP Structure , Cable end termination for HT Outdoor type , Cable end termination for HT Indoor type , Aluminium lugs 185 Sqmm , Fire Bucket , Mounting Stand for fire bucket , Wall hook for fire buckets , Rubber hand gloves suitable for working on 11KV to 22 KV supply. , 11 KV Ring Main Unit , Construction of plinth for 11KV RMU , LVDB Panel , 630A, 4 Pole, Air Break Fixed MCCB , 400A, 4 Pole, Air Break Fixed MCCB , 80 to 250A, 4 Pole, Air Break Fixed MCCB , Earthpit for electrical installation up to 440 V , Earthpit for electrical installation up to 11 KV , Earthpit for electrical installation - Independent Earthing , HOT deep Galvanised iron strip for earthing , rubber matting , RCC Hume pipe for cable in NARMADA, GUJARAT. Quantity: 11810 issued by . Submission Deadline: 16-09-2025 18:00:00. View full details and respond.

Narmada Water Resources Water Supply and Kalpsar Department Gujarat
Sardar Sraovar Narmada Nigam Limited
Narmada, Gujarat - 391111
Goods
Qty: 11.8K
EST: ₹1.9 Crore

Financial

Estimated Bid Value:₹1,85,44,080.00
Bid Offer Validity:180 (Days)
Past Performance:40 %
Arbitration Clause:No
Mediation Clause:No

Technical

Evaluation Method:Total value wise evaluation
Inspection Required:Yes
Technical Clarifications Time:2 Days

Timeline

Issue
August 26, 2025 at 5:42 PM
Bid deadline: September 16, 2025 at 6:00 PM
Bid Opening
16-09-2025 18:30:00
Bid opening: 16-09-2025 18:30:00

Bid Opening Information

Bid Opening Date:16-09-2025 18:30:00

Tender Configuration

Bid Type
Goods

Categories

CABLE CLIPS
CABLE SPLICING KITS
CABLE SUPPLY
CABLE TRAY
ELECTRICAL PRODUCTS
ELECTRICAL SUBSTATION
FIRST AID BOX
HDPE PIPE
HEATING WIRE
INSTRUMENTATION CABLE
LIGHTENING PROTECTION DEVICE
POWER CABLE
RUBBER AND OTHER MATS
RUNWAY LIGHTING
STATIC CONVERTERS
STRAIN RELIEFS
TRANSITION METALS
TURBINE SPARE PART
VIDEO FILM
XLPE CABLE

Tender BOQ Items

36 Items
1.

3C 185 Sqmm XLPE insulated 11 KV armoured cable Aluminium conductor

Providing and erecting ISI Marked 3core 185 Sq.mm XLPE insulated 11 KV armoured cable Aluminium conductor IS-7098 to be laid on wall with clamps or in provided cable trench / pipe approved manner as directed. Make - Polycab/RRKabel/FInolex

Qty:4300
Unit:meter
365
2.

Glass Fiber Filled Moulded Cable Cleats

Supplying and erecting of Glass or Fibber Filled Moulded Single Core Cable Cleats with Ms Zinc Passivated hardware having following specifications - The material used in Single clamp is Thermoplastic, UV Stabilized system & Glass or Fibbers as reinforcement. Glass Content 15 - 30 percentage. It should be connected with MS Zinc passivated hardware of size M10 for clamping. It should generally be made as per BS EN 50368 2003 specification for cable cleat for Electrical Installation. The tensile strength of the material at yield is 800 - 1200 Kg per sq.cm. The Flexural strength of the material at yield is 1000 - 1600 Kg per sq.cm. The Izod Impact strength of the material at yield is 50 - 60 J per M. Overall Dia of cable in mm - Min 64 to Max 70 mm Hole centre of Mounting Distance - 110mm +/- 5 mm

Qty:200
Unit:each
365
3.

3.5 core 500 Sq.mm, 240 Sqmm 0.5 core XLPE armoured cable multistrand Aluminium conductor for 1.1 KV

Providing and erecting XLPE(IS 7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables - 3 1/2 core 500 Sq.mm ( 240 Sq. mm 1/2 core) (Make - Polycab/RRKabel/FInolex)

Qty:500
Unit:meter
365
4.

Double compression type cable gland

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables - 3 & 1/2 core 500 Sq.mm. (Make - Polycab/RRKabel/FInolex)

Qty:3
Unit:each
365
5.

Aluminium lugs 500 Sqmm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 500 Sq.mm. size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

Qty:14
Unit:each
365
6.

Aluminium lugs 240 Sqmm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 240 Sq.mm. size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

Qty:4
Unit:each
365
7.

Cable end termination Kit suitable for LT

Providing and erecting Epoxy Outdoor - Indoor end termination Kit suitable for LT PVC insulated armoured cable 1.1 KV grade complete with ferrule bushing and accessories and suitable clamps duly erected and connected to the supply for all cores cables of following size. 400 to 500 Sq. mm

Qty:4
Unit:each
365
8.

FRP Ladder type Cable Tray

Supplying and erecting approved make GRP / FRP Ladder type Cable Tray. Material - Corrosion Resistant Polyester Flame Retardant UV Stabilized Resin System - Manufactured from Pultruded Sections - Polyester Resin System, Glass Content - 55 to 60 percentage, Thickness- Rung Sq. Hollow Tube 25mm x 25mm - Fixing of Rung to Side Rail with Thermoplastic Pin & Epoxy Adhesive, Assembly Single Stroke 3 Mtr. Length- Rung Spacing - 300mm, Length of Tray - 3000mm, Support Span - 2500mm, Deflection L/200 or less than 10mm whichever is less, Specification Followed NEMA FG1 1993- UV Resistant - Flame Retardant - IS 6746 - Appendix K/UL 94, Very Low Flammability - Oxygen Index - Minimum 30 Percentage as per ASTM D 2863. Flame Spread (Extent of Burning) - 20mm as per Standard ASTM D 635 - Tensile Strength - 4000 to 8000 Kg/cm2 as per Standard (B) Width 300 mm, Side Member C Section - 100 x 35 x 35mm with 4mm Thickness, Loading 60Kg./Mtr. With Concentrated Load 70Kg. at center of the span

Qty:1000
Unit:meter
365
9.

HDPE Pipe of 90 mm internal diameter

Providing and erecting in standard length ISI mark high density Polyethylene HDPE Pipes of 90 mm internal diameter suitable for potable water as per IS specification no. 4984/1995 including all local and central taxes, transportation, freight charges, inspection charges, loading, unloading, conveyance to the dept. stores etc. comp. 6.0 Kg/cm2.

Qty:2000
Unit:meter
365
10.

HDPE Pipe of 110 mm internal diameter

Providing and erecting in standard length ISI mark high density Polyethylene HDPE Pipes of 110 mm internal diameter suitable for potable water as per IS specification no. 4984/1995 including all local and central taxes, transportation, freight charges, inspection charges, loading, unloading, conveyance to the dept. stores etc. comp. 6.0 Kg/cm2.

Qty:2300
Unit:meter
365
11.

Trench in Hard Murrum

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground.

Qty:750
Unit:meter
365
12.

Trench in Hard Murrum with hammer driller or JCB use

Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for laying any size of cable or locating the fault all over the run and back filling the same and making the surface as normal ground with use of additional machinery like hammer driller or JCB use

Qty:250
Unit:meter
365
13.

Casting of transformer foundation

Casting of transformer plinth / foundation including oil soak pit (where required) in situ reinforced cement concrete in M20 using granite, quartzite trap metal of size 6 mm to 20 mm for RCC work including providing of 53 grade cement & Fe 415 grade TMT bars, scaffolding, centering, form work, curing etc. complete. RCC plinth / foundation for transformer of capacity of 500 KVA. Transformer Rating (500 kVA) Plinth Dimensions (1500x1500x 1500)

Qty:1
Unit:meter
365
14.

500 kVA Transformer

Providing, erecting, testing & commissioning approved make oil immersed ONAN cooled, double wound, core type indoor / outdoor copper wound 11KV/ 433V step down transformer of 500 KVA, operating on 3 phase, 50 Hz 4 wire & neutral earthed system continuously rated for a full temperature rise in oil not exceeding 45 Deg.C.at maximum ambient temp. of 50 Deg. C. complete with necessary radiator first filling of new transformer oil & standard fitting as below complying with IS 1180( Part 1) 2014 standards with energy efficiency level 2, Off load tap changing range steps +2.5 percentage to -5 percentage on HV for variation should be provided. The HV shall be connected Delta & Secondary with star connection. The transformer should have cable-end boxes on HT side suitable for up to 3 core 150 sq.mm. XLPE cable & on LT side suitable for bus duct or cables as per requirement complete with test certificates from manufacturers. 1. Oil conservator with filling Hole & Cap - One No. 2. Thermometer pocket with 6 inch dial type thermometer switch alarm & trip contacts- Two nos. 3. Silica-gel breather with charge- One No.4. Plain oil level gauge - One No. 5. Drain / Sampling / Filter valve- One No. 6. Top Filter Valve - One No. 7. Explosion vent with Diaphragm - One No. 8. Rating & Diagram plate - One No. 9. Additional neutral bushing for earthing - One No. 10. Bi directional Roller - Four Nos. 11. Earthing terminals - Two Nos. 12. Lifting lugs - Two Nos. 13. Air release plug. - One No. 14. Double float buchholz relay with Alarm and trip contacts. 15. Control cable as required from Transformer to VCB Panel is to be provided with necessary connection to VCB relays for protection.as per IS 1180 level-2. Max. allowable loses at 50 percentage of rated load is 1.510 KW and at full load is 4.3 KW Cat.III

Qty:1
Unit:each
365
15.

Straight joint for HT cable

Disconnecting the cable connection and Providing straight joint with PVC mould using heat shrink /cast resin type epoxy compound Insulating material and making the joint complete using necessary in line connectors, hardener, earth continuity connection, spacers etc. and reconnecting the same & ensure the joint resistance within the limits as per IS. For 120 to 300 Sq. mm cable.

Qty:8
Unit:each
365
16.

11 KV DP Structure

Providing, and erecting 11 KV D.P. 9 mtr. high Structure made of 6 inch x 3 inch I - Section Girder, 4 inch x 2 inch channels, clamps, nuts, bolts etc. Suitable for erection of the followings duly connected with necessary ACSR conductors. as per drawing approved by the Engineer- in charge complete with following. Height as per IS 7 Mtr above ground (A) 11 KV 200 Amps Drop out fuses with S.R.B.P. tubes carries.-Three nos (B) 11 KV G.O.D. switch complete with insulators, operating handle with galvanised pipe, Sq.bar etc. 400 Amp.- One Set (C) 11 KV lightening arrestor with clamp - Three Nos. (D) 11 KV shackle insulators- Six Nos. (E) The above D.P. structure should be earthed with 25 mm.X 3 mm thick double copper earth strips run separately and connected with separate copper plate earth electrode.

Qty:1
Unit:each
365
17.

Cable end termination for HT Outdoor type

Providing and erecting cable end termination kit, heat shrinkable Push on type Densons/ Raychem/ Elastimold make suitable for 11 KV XLPE cable 3core 185 Sq.mm - Outdoor type

Qty:10
Unit:each
365
18.

Cable end termination for HT Indoor type

Providing and erecting cable end termination kit, heat shrinkable Push on type Densons/ Raychem/ Elastimold make suitable for 11 KV XLPE cable 3core 185 Sq.mm - Indoor type

Qty:2
Unit:each
365
19.

Aluminium lugs 185 Sqmm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 185 Sq.mm. size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner.

Qty:30
Unit:each
365
20.

Double compression type cable gland

Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables - 3 core 185 Sq. mm

Qty:30
Unit:each
365
21.

Fire Bucket

Supplying FIRE bucket round bottom of 9 litres capacity made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and Red out side with FIRE mark, filled with dry-sand and kept on existing stand provided or hung on wall hook.

Qty:8
Unit:each
365
22.

Mounting Stand for fire bucket

Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets comprising 1500 mm in length, 900 mm height frame made out of 30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of approved enamelled silver paint.

Qty:2
Unit:each
365
23.

Wall hook for fire buckets

Wall hook 22 to 25 cms. projection for keeping fire buckets made out of 15 mm dia. M.S rod grouted in wall to a depth of minimum 15 cms.

Qty:8
Unit:each
365
24.

Rubber hand gloves suitable for working on 11KV to 22 KV supply.

Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply.

Qty:4
Unit:each
365
25.

11 KV Ring Main Unit

11kV Ring Main Unit (RMU) Supply, installation, testing & commissioning Outdoor type 11 KV, 630 Amps. 21 kA for 3 second SF6 type non extensible and motorized 5 way smart Ring Main Unit (RMU) complete with (3 VCB + 2 LBS) as per reuirement of Engineer In-Charge with FRTU and FPI as per IS

Qty:3
Unit:each
365
26.

Construction of plinth for 11KV RMU

Construction of plinth for 11KV, RRLLL type - 5 Way Ring Main Unit as per DGVCL technical specification mentioned in drawing no - Drg. 11kv-02. All required material will be supplied by contractor.

Qty:3
Unit:each
365
27.

LVDB Panel

Supply of LV Distribution Board (LVDB) totally enclosed, dust & vermin proof, indoor type, fabricated from CRCA sheet steel with minimum thickness of 3 mm for base frame / channel / gland plates, 2.0 mm for load bearing members / doors & 1.6 mm for internal partitions, minimum degree of protection - IP 52 as per IS 2147, suitable for operation on 3-Phase, 4 Wire, 415 V, 50 Hz, Neutral effectively grounded, with instrumentation compartments accommodating meters, aux / protective relays, LED type indicating lamps & control MCBs as per IS 13947, current & voltage transformers as per IS 2705, air insulated electrolytic grade Aluminium / Copper bus bar for three phase & neutral system, GI earth bus for entire length, power / control wiring using 1100 V grade, FRLS insulated copper conductor wires conforming to IS 694 & 8130, equipment fittings, horizontally running busbar compartment height of minimum 300 mm, incoming & outgoing cable connections for 1100 V grade, Aluminium / Copper conductor XLPE / PVC insulated & PVC sheathed armoured cable. LVDB shall have required incoming / bus coupler / outgoing modules of following type & ratings. Incoming 1250 A, 3 & 4 Pole, ACB (Draw-out Type) with Thermal Magnetic / Microprocessor release (O / C, S / C & E / F) having breaking capacity Icu of 50 kA at 415V with 6NO+6NC potential fee auxiliary contacts, secondary isolating contacts with all necessary Electro Mechanical protections & interlocks etc. ACB Module shall have enclosure dimension - 2000 (H) x 800 (W) x 1000 (D) & following technical features- 4 pole, EDO with Microprocessor Release

Qty:1
Unit:each
365
28.

630A, 4 Pole, Air Break Fixed MCCB

630A, 4 Pole, Air Break Fixed MCCB conforms to IS / IEC 60947-2 with trip free mechanism,current limiting type with Thermal Magnetic/ Microprocessor release (O / C, S / C & E / F) with adjustable settings & having minimum 2NO+2NC potential free auxiliary contacts with all necessary Electro Mechanical protections & interlocks etc. MCCB module, when used as Incommer/ Bus Coupler, shall have enclosure dimensions- 2000 (H) x 650 (W) x 600 (D) & following technical features- 4 Pole, MCCB with Breaking Capacity of Icu - 50 KA at 415V (Ics - 100 percentage of Icu), Microprocessor release

Qty:1
Unit:each
365
29.

400A, 4 Pole, Air Break Fixed MCCB

400A, 4 Pole, Air Break Fixed MCCB conforms to IS / IEC 60947-2 with trip free mechanism,current limiting type with Thermal Magnetic/ Microprocessor release (O / C, S / C & E / F) with adjustable settings & having minimum 2NO+2NC potential free auxiliary contacts with all necessary Electro Mechanical protections & interlocks etc. MCCB module, when used as Incommer/ Bus Coupler, shall have enclosure dimensions- 2000 (H) x 650 (W) x 600 (D) & following technical features - 4 Pole, MCCB with Breaking Capacity of Icu - 50 KA at 415V (Ics - 100 percentage of Icu), Microprocessor release

Qty:2
Unit:each
365
30.

80 to 250A, 4 Pole, Air Break Fixed MCCB

Above 80 A, upto & including 250 A, 4 Pole, Air Break Fixed MCCB conforms to IS / IEC 60947-2 with trip free mechanism, current limiting type with Thermal-Magnetic / Microprocessor release (O / C, S / C & E / F) with adjustable settings & having minimum 2NO+2NC potential free auxiliary contacts with all necessary Electro-Mechanical protections & interlocks etc. MCCB module, when used as Incommer / Bus Coupler, shall have enclosure dimensions - 1800(H) x 600(W) x 600 (D) & following technical features - 4 Pole, MCCB with Breaking Capacity of Icu-50 KA at 415V (Ics - 100 Percentage of Icu), Microprocessor release

Qty:5
Unit:each
365
31.

Earthpit for electrical installation up to 440 V

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate including value of earth resistane of installation). For electrical installation up to 440 V Length of Pipe - 1 Mtr , Back filling compound - 1 Nos. of Bag of 15 Kgs.

Qty:3
Unit:each
365
32.

Earthpit for electrical installation up to 11 KV

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate including value of earth resistane of installation). For Electrical installation up to 11 KV located in other than normal soil i.e Soft Rock, Marshy Soil etc. -Length of Pipe - 2 mtr -Back filling Compound - 1 no. Bag of 25 Kg.

Qty:10
Unit:each
365
33.

Earthpit for electrical installation - Independent Earthing

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped GI Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover. (approved make OEM has to submit test certificate including value of earth resistane of installation) For Electrical Installation covering Transformer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc. -Length of Pipe - 3 Mtrs. Back filling Compound - 2 nos Bags of 25 Kg.

Qty:2
Unit:each
365
34.

HOT deep Galvanised iron strip for earthing

Providing and erecting required size HOT deep Galvanised iron strip for earthing of HT , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp.

Qty:300
Unit:kgs
365
35.

rubber matting

Supplying rubber matting of following thickness of 12 mm as per IS 15652/IEC 61111

Qty:30
Unit:sq mtr
365
36.

RCC Hume pipe for cable

Providing & laying. R.C.C. Hume pipe of 300 mm dia for cable to be laid 90 cm. below ground across the road crossing or on floor with necessary material in an approved manner and making the ground as per original.

Qty:20
Unit:meter
365

Tender Documents

5 Documents
GeM-Bidding-8191855.pdfMain Document

Click to purchase access

BOQ DocumentBOQ BOQ

Click to purchase access

BOQ DocumentBOQ BOQ

Click to purchase access

Buyer uploaded ATC documentATC ATC

Click to purchase access

GEM General Terms and Conditions DocumentGEM_GENERAL_TERMS_AND_CONDITIONS

Click to purchase access

Probable Bidders

Companies likely to bid
🔥 HOT
💎 PREMIUM

Ultimate Power Pack

₹499/M₹1,200
🚀 Save 58% LIMITED TIME
⏰ Grab before it ends! Only few left!

🎯 Unlimited Downloads

Download ANY tender document instantly - No limits!

Worth ₹5,000+ value

📊 AI Analytics Dashboard

Professional insights & competitor intelligence

Worth ₹2,000+ value

🎁 BONUS FEATURES

🤖 AI Analytics
🕵️ Competitor Intel
🆘 24/7 Support
⚡ Instant Access
💰 100% Money-Back Guarantee

Similar Business Opportunities

5 similar tenders found • 1 urgent

GEM
Goods

sitc of 160 kva copper wound oil cooled transformer,supplying of unearthed or earthed armoured alum

Bharat Sanchar Nigam Limited Portal(bsnl)
MUZAFFARPUR, BIHAR
Qty: 66
September 2, 2025
September 23, 2025 at 1:00 PM
Qty: 66
5 documents • Ready to bid
View Details
GEM
Goods

4 SQ.MM. PVC INSLATED SINGLE CORE,2.5 SQ.MM. PVC INSULATED SINGLE CORE,1.5 SQ.MM. PVC INSULATED SIN

Chennai Port Trust
CHENNAI, TAMIL NADU
Est. Value: 9.3 Lakh
Qty: 5,169
September 9, 2025
September 30, 2025 at 4:00 PM
Qty: 5,169
5 documents • Ready to bid
EMD: 9,341
View Details
GEM
Goods

12 Core Single mode Armored OFC cable,40mm PLB HDPE pipe,12 core Fiber Joint Enclosure,Manhole,Outd

Ans,finance,hr,engineering,tech,ops,commercial,general Store,it
BHOPAL, MADHYA PRADESH
Est. Value: 27.9 Lakh
Qty: 8,726
September 10, 2025
October 1, 2025 at 11:00 AM
Qty: 8,726
5 documents • Ready to bid
EMD: 27,877
View Details
Auto-playing (1 of 2)